Serving Maricopa County Arizona

service@pristinepooltile.com

Call (480) 993-5280

Home  |  About Us  |  Tile Cleaning  |   |  Acid Wash  |  Pool Joint Repair  |  Deco Joint Replacement  |  Other Services 

Tile Repair Services

Here’s how we do it...

1. First we tap out the entire pool to determine if there are any additional very loose tiles that should be removed and reset. If so, We remove these tiles. We lower the level of the pool water about 6" with our pumps to accomplish this.
2. We then use angle grinders and other tools to remove all old thinset from the pool wall.
3. Next we "clean up" all old tiles (if new ones are not available) to prepare them for re-set to the wall.
4. We then apply a waterproof thinset material to the wall and/or back of the tiles.
5. Finally, we re-grout the tiles and then vacuum any remaining debris from the bottom of your pool with our portable vacuum system to prevent any debris from going through your filter.
6. Congratulations! Your pool tile is now as good as new!

Some key facts about our process...

• The entire process usually takes 1-8 hours to complete – depending on the number of tiles and their condition that need to be re-set.
• We GUARANTEE satisfaction. Please check our “ABOUT US” webpage.
• We never “surprise” you with extra costs. Our quotes are firm and good for 60 days.

Your firm quote...

• Our charge for this service runs $30-$60 for the service call depending on your location and $60/hour for the work with a one hour job minimum.
• To minimize the cost of this repair, we generally ask that the homeowner supply new replacement tile (if it is available) to help us avoid the expense of "cleaning up" the old tile. There are three primary sources for the tile that we refer you to.

Scheduling Service...

• To schedule service just give us a call at (480) 993-5280.
• We ask that you be present when we start the job to assure mutual understanding of the job requirements. We take it from there!