|
1. First we lower your pool’s water level by approximately 6-8 inches, then
2. We use a proprietary jet-air, re-circulating blasting process to clean your waterline.
3. Congratulations! Your tile/pebbletec waterline is now “PRISTINE” again!
4. Now we wipe off any remaining dust residue from the cleaned surface.
5. Next, we treat your waterline with a special protectant to retard future calcium buildup.
6. Then we use a portable vacuum system to remove any remaining residues from your pool.
7. Finally, we clean off any remaining residue from your pool deck area.
|
|
• Our process is environmentally friendly, efficient and safe.
• The entire process usually takes approximately 3-5 hours to complete.
• Prior to starting the job, we choose the correct blast media and pressure.
• Blast media ranges from kieserite (soft) to glass bead (medium) to garnet (hard).
• We always choose a blast media that is "softer" than the surface to be cleaned.
• Doing this minimizes any possibility of damage to the surface being cleaned.
• Our system uses air passed over a media feed tube to "draw in" media into the air stream.
• This "venturi" type system is safer on your tile than pressure pot and water blast systems.
• As the media is striking the surface and removing calcium, it is also being vacuumed back into our machine.
• This dual action system prevents media from covering your deck and filling your pool!!
• We GUARANTEE your satisfaction. Please check our “ABOUT US” webpage.
• We never “surprise” you with extra costs. Our quotes are firm and good for 60 days.
|
|
• Determine your pool's waterline lineal footage. For example, a 17’ x 30’ pool will have 94 lineal feet(17x2 + 30x2) to
be cleaned.
• Our price is $3.00 - $4.00 per lineal foot with a job minimum of $250.00.
• Exact pricing per lineal foot depends on calcium buildup, tile vs. pebbetec, diving vs. play pool, full vs. empty, and overall footage.
• In the above example (94 feet), the cost would therefore be in the range of $282.00 - $376.00
• Please give us a call at 480-993-5280 and we can discuss particulars of your pool
and give you a firm quote per lineal foot..
• Since special features - such as waterfalls, walls, imbedded rock formations or negative edges require a bit more time,
we firm quote these features on-site at the rate of $60.00/hour. In most cases these
features take less than an hour to clean.
• Please try our online "preliminary quote range" calculator below:
|
|
Acid Wash |
Pool Joint Repair |
Deco Joint Replacement |
Cool Deck Repair |
Other Services